This DIY guide share by one of my blog readers ” artzc “,here is re-edit it to show you how to program a new key (add new key) for Toyota Solara 2002 by yourself no need any devices.And if you need more instruction on Toyota locksmith,please check here:Toyota Key Programming
Add New Spare Key for Toyota Solara:
1) Place an already programmed Master key (one that works all locks) in the ignition, but DO NOT turn on.
2) Press the GAS pedal five (5) times.
3) Press the BRAKE pedal six (6) times.
4) Remove the key from the ignition.
5) Insert the new key, but DO NOT turn it on.
6) Press the GAS pedal one (1) time only and wait about a minute for the security light to quit flashing.
7) Remove the key and Press the BRAKE pedal one (1) time only.
Wait at least ten (10) seconds, then re-insert the new key and start the car.
You can have a maximum of ten (10) transponder keys programmed into your car.
Here is the instruction show you guide on how to repair P0731 incorrect 2nd gear ration…
Here is the how to use guide on Caterpillar machine misfire detection test by CAT…
On the Trucktool diagnostic software Settings view, you can edit single parameters, import and export…
Here is the instruction show you guide on how to solve Scania truck road transport…
Here is the instruction show you guide on how to solve engine speed sensor circuit…
This instruction show you guide on how to use CAT ET 2025A to perform override…