How to Change the Engine Oil by Yourself for Mercedes GLK

This instruction will show you guide on how to change the engine oil at home for Mercedes GLK.

This is same topic article for your further reference:

How to Change the Oil on Mercedes Benz GLK350 4Matic

 

Steps:

Use a jack underneath to lift both the wheels off the floor (you can also do the oil change on the ground)

Unlock all the bolts then take the engine cover off

Oil drain is right there , unlock the 13mm nuts

Put a vessel under the oil drain, Leave to drain while changing oil filter

Take off the engine cover,then remove oil filter housing

Replace three O-rings and filter

Put it back in position

 

More cases about Benz, please refer to Benz Trouble Repair.

Kevin

Recent Posts

Scania Truck ALM 000463 Motion and Inclination Detector,Calibration Fault

This instruction show you guide on how to solve Scania truck motion and inclination detector,…

2 weeks ago

How to Solve JCB Excavator C130C-13 Spool Brake Solenoid Open Circuit

This instruction show you guide on how to solve JCB excavator 140 C130C-13 spool brake solenoid…

2 weeks ago

Scania Truck ALM Alarm System ALM404 Fault in the CAN Communication Solution

Scania truck fault in the CAN communication with the chassis management system (CMS),this instruction show…

4 weeks ago

Perkins Phaser/1000 Series Engine New Water Pumps Changed

The water pumps used on all Phaser/1000 Series engines have been changed. The changes to…

4 weeks ago

Deutz Engine EMR3 Request of Engine OFF Error Solution

Here is the simple instruction on how to solve Deutz engine EMR3 trouble code 48…

1 month ago

How to Use Cat ET 2025A Power Shift Pressure Test Function?

CAT ET 2025A Power Shift Pressure Test function checks whether that the proportional reducing valve is…

1 month ago