This is instruction show you guide on how to adjust cruise control release linkage for Kubota L3301 L3901 L4701 excavator.
Related Contents:
2024 Kubota Takeuchi Diagmaster v24.01.06 Software Free Download
Kubota EPC Spare Parts Catalogue 2021.06 Download
Adjusting Cruise Control Release Linkage
1. Adjust the brake pedals free travel first.
2. Depress one of the brake pedal to make sure the cruise control is not released. Also depress both the brake pedals coupled together to make sure that the cruise control is released.
3. If the cruise control does not work as above adjust with release wire (1) as follows.
• Check to see that the threaded portion of the wire (1) rear side is set at the end position. If not, set by lock nuts (2).
• Adjust by lock nuts (4) for the center of the threaded portion of the release wire front side to come to the hook position.
• Make sure whether to move as above-mentioned 2.
• If not, adjust by lock nuts (4).
(1) Release Wire
(2) Lock Nut (Rear)
(3) Damper Stay
(4) Lock Nut (Front)
More repair case for Kubota,please refer to:Kubota Trouble Repair
This instruction show you guide on how to remove and install crankshaft rear seal for…
This instruction show you guide on how to use JPRO diagnostic to do SCR performance…
Here is the instruction show you guide on how to remove and disassemble master cylinder…
This instruction show you guide on how to solve Deutz EMR engine 71 / 2791 /…
Here is the instruction show you guide on how to repair P0731 incorrect 2nd gear ration…
Here is the how to use guide on Caterpillar machine misfire detection test by CAT…