Categories: Auto Coding

E-SYS BMW Coding Functions List

Here share the 25 kinds of bmw coding to hidden or enable function on you car by BMW E-sys.You just need a BMW ENET cable to coding these functions by yourself.

2024.08 BMW Rheingold ISTA+ 4.48.40 4.23.14 ISTA-P 3.71 Free Download

E-SYS BMW Coding Functions List:

  1. 1. GPS time synchronization
  2. Can operate the navigation menu including watching DVD when driving( for driving safety. Let the side driver operate the navigation menu )
  3. Disable seat belt reminder mistake ! The link is invalid. Device – passenger seat
  4. Cancel confirmation screen big screen boot delay
  5. Open the voice recognition function
  6. 6. Angel eyes open and cancel functions
  7. Increasing the CIC memory address to 50
  8. The glass automatically rise to the top process is not terminated by the car door ( easy to get off to close the window waiting )
  9. The digital speed display ( fun only )
  10. 10. Disable seat belt reminder – driving position
  11. Indoor cycling memories of the last time the state when engine off
  12. A-pillar electric tailgate buttons and remote control a key to close the power tailgate. At any time terminate the reverse operation ( turn off 15 minutes or more reset )
  13. Increasing shift paddles
  14. The small screen to the large-screen display modify
  15. PDC display vertical and horizontal
  16. Disable the seat belt status display – passenger seat
  17. Disable the seat belt status display – driver seat
  18. 18. Display engine output and torque meter ( purely fun, look engine output )
  19. 19. Air-conditioned memory of the last off state ( without air conditioning season is more convenient )
  20. Disabled unfasten their seat belts voice prompts – passenger seat
  21. Disabled unfasten their seat belts voice prompts – driving position
  22. Intersection vehicle high beam automatic control ( no condition tested. Do not know if it is valid )
  23. 23. Three kind of Bluetooth phone ringtones ( personality only )
  24. 24.Turn off the engine start-stop function turned on by default
  25. 25. Lock unlock sound confirmation ( to prevent radio interference, add sound to confirm car locked when turn light confirmation inconvenient. This is setup in CIC)
auto

Recent Posts

Scania Truck ALM 000463 Motion and Inclination Detector,Calibration Fault

This instruction show you guide on how to solve Scania truck motion and inclination detector,…

2 weeks ago

How to Solve JCB Excavator C130C-13 Spool Brake Solenoid Open Circuit

This instruction show you guide on how to solve JCB excavator 140 C130C-13 spool brake solenoid…

2 weeks ago

Scania Truck ALM Alarm System ALM404 Fault in the CAN Communication Solution

Scania truck fault in the CAN communication with the chassis management system (CMS),this instruction show…

4 weeks ago

Perkins Phaser/1000 Series Engine New Water Pumps Changed

The water pumps used on all Phaser/1000 Series engines have been changed. The changes to…

4 weeks ago

Deutz Engine EMR3 Request of Engine OFF Error Solution

Here is the simple instruction on how to solve Deutz engine EMR3 trouble code 48…

1 month ago

How to Use Cat ET 2025A Power Shift Pressure Test Function?

CAT ET 2025A Power Shift Pressure Test function checks whether that the proportional reducing valve is…

1 month ago