This post show you guide on how to replace manifold absolute pressure sensor for Chevrolet Avio. More repair case for Chevrolet,please refer to Chevrolet Trouble Repair
Related Contents:
GM EPC GMIO GMNA General Motors EPC 2021 2017 Free Download
GM GDS2 2019 v20.3.05100 Software Free Download
Procedures:
Removal Procedure
1.Disconnect the negative battery cable.
2.Disconnect the T-MAP sensor connector.
3.Remove the T-MAP sensor retaining bolt.
4.Remove the T-MAP sensor (1).
Installation Procedure
1.Install the T-MAP sensor (1).
2.Install the T-MAP sensor retaining bolt and tighten to 10 N·m (89 lb in).
3.Connect the T-MAP sensor connector.
4.Connect the negative battery cable.
This instruction show you guide on how to solve Scania truck motion and inclination detector,…
This instruction show you guide on how to solve JCB excavator 140 C130C-13 spool brake solenoid…
Scania truck fault in the CAN communication with the chassis management system (CMS),this instruction show…
The water pumps used on all Phaser/1000 Series engines have been changed. The changes to…
Here is the simple instruction on how to solve Deutz engine EMR3 trouble code 48…
CAT ET 2025A Power Shift Pressure Test function checks whether that the proportional reducing valve is…