The JPRO Diagnostics kit allows us to perform ECU reset test for Bendix EC-60 and EC-80 braking system.Here show the simple steps.
The ECU Reset Test is available on:
✓ EC-60 and EC-80 braking systems
This test resets the brake ECU, similar to turning the ignition off and on. During the reset any braking system related dashboard lamps will flash. Once the reset is completed, a chuff test will automatically be performed.
Related Contents:
2024 JPRO Noregon Commercial Fleet Diagnostics Free Download
Steps:
1 Select the ECU Reset Test and press Enter or the Start button.
2 The test dialog will be displayed.
3 Select the Reset button to initiate the test. A confirmation message will appear.JPRO DLA+ 2.0
4 Click Yes to perform the ECU reset. A countdown timer will be displayed while the reset is occurring. The test
cannot be abandoned during the reset.
5 When done, press the Exit button to return to the test selection dialog.
More topics about JPRO Diagnostic,please refer to:JPRO Diagnostics Guide
This instruction show you guide on how to solve spool brake solenoid open circuit for…
This instruction show you guide on how to remove and install crankshaft rear seal for…
This instruction show you guide on how to use JPRO diagnostic to do SCR performance…
Here is the instruction show you guide on how to remove and disassemble master cylinder…
This instruction show you guide on how to solve Deutz EMR engine 71 / 2791 /…
Here is the instruction show you guide on how to repair P0731 incorrect 2nd gear ration…