Audi Q7 Dynamic Turn Signal Coding by OBDeleven

LED tail lights is two types:with flashing turn signal and dynamic turn signal.To make retrofit from flashing to dynamic,need change both tail lights and connect wirings.This instruction show you guide on how to use OBDeleven adapter to activate dynamic turn signal for Audi Q7.More cases about OBDeleven adapter please refer to:OBDeleven Projects.

 

Preparations:

OBDeleven VAG Car Diagnostics App Free Download

OBDeleven OBD2 Adapter (Amazon Official Shop)

 

Procedures:

Connect OBDeleven adapter to Audi Q7 obd port

Run OBDeleven APP,and press “Connect”

After communication build,the car model will show on application,then press “Apps” at bottom

Press “RETROFITS” and select “Dynamic Turn Signal”

Here it will show detail

Press “CHANGE VALUE”

Select “ON”,then press “ACTIVATE”

It will start activating,when it finish show “Done”

Now test new feature dynamic turn signal on your car.

auto

Recent Posts

Scania Truck Direction Indicator Front Right CUV 5 Trouble Repair

Here is the instruction show you guide on how to solve Scania truck direction indicator…

3 days ago

How to Solve CAT C9 Engine 8 Volt Supply Voltage High Problem

This instruction show you guide on how to solve Caterpillar C9 engine 8 volt supply…

1 week ago

How to Replace HV Battery ECU for HINO Truck J05E Engine

This instruction show you guide on how to remove and install HV Battery ECU for…

2 weeks ago

Scania Truck CAN Communicatinon Fault Engine Control Unit Error Solution

This instruction show you guide on how to solve CAN communication engine control unit error…

2 weeks ago

Caterpillar C9 Engine Injection Actuation Pressure Output Fault Solution

This instruction show you guide on how to solve Caterpillar C9 engine injection actuation pressure…

4 weeks ago

How to Remove HV Battery Cooling FAN for HINO Truck with J05E Engine

Here is the instruction show you guide on how to remove HV battery cooling fan…

4 weeks ago