VCDS 20.4.0 19.6.0 Full+9.2 Loader Free Download & Installation Guide

What is VCDS?

VCDS (www.ross-tech.com)is short called “VAG-COM Diagnostic System ”,also called VAG-COM.VCDS is primarity used for diagnostic and adjustment for Volkswagen Group vehicle.VCDS will perform most of functions that only performed by expensive official dealers,it is very suitable for DIY user and garage.

 

VCDS Functions List:

Auto Scan

Control Unit Info

Read Fault Codes

Output Tests

Selective Output Tests

Basic Setting

Clear Fault Codes

Close Controller

Code Module

Code Slave Modules

Measuring Blocks

Advanced Measuring Values

Single Reading

Adaptation

Login/Coding II

View Readiness

Guided Readiness Scripts

Security Access

Support Codes

Generic OBD-II

Freeze-Frame Data

Dual K-Line Support

Digit PINs (VAS only)

Code Database Up to Date

Diagnostics via CAN

Transport Mode

Support for Dual ECUs

Data Logging

HighSpeed DataLogging

Real-Time Graphs

Real-Time Gauges

Graphic TDI Timing Checker

Control Module Finder

Automate Service Reset (SRI)

ECU Mileage Checker

Controller Channel Maps

Wireless Connection via WiFI

Installation List

LT3/Crafter Support

 

VCDS Support Vehicle Models List:

The following VCDS Compatibility Charts are based on Model and Chassis Type. To find the Chassis Type for your car, look at the 7th and 8th digits of the VIN number. The Chassis type will usually be found in these digits. There are exceptions.

 

Example (Audi A6):

VIN: WAUZZZ4F36N111022

The 7th and 8th digits are 4F for Audi A6 (4F), the 10th digit is 6 which stands for Model Year (MY) 2006. See the Model information Column for Audi to find the A6 Model. Note that the Chassis Type “4F” is listed under that model. Look horizontally across the VCDS Compatibility Chart until you find the Model Year 2006 and you can determine which interface(s) is required for that Chassis. In this particular case you will see that only the HEX+CAN series interface is compatible.

Please Note: Older VCDS versions may not support all of the model years listed. These charts are intended for the most current version of VCDS (in rare cases even Beta Versions).

Check the VCDS Compatibility Charts to get details

 

VCDS Support Languages:

Česky,Chinese,Dansk,Deutsch  ,Español ,Français,Italiano,Magyar ,Nederlands,Polski,Português,Romana,Russian,Svenska

 

VCDS Software Free Download

VCDS v.20.4.0.ENG

https://mega.nz/file/nAsQxIIL#3GMFt-iqCB0LlpmlgVUn5Pa2WQl6LDUIt1G2p5pAvN4

 

VCDSLoader_v9.2

https://mega.nz/file/b040Ua6K#2QZ4rZlOg_Ct4wlZKdMrBlEQdf6mZPYdri4_BpukHTw

Password: mhhauto

 

VCDS with Loader v9.2 – English 19.6.0, non-English (tested PL and HU)

 

VCDS 17.8 MULTILANGUAGE FULL.txt

Below download links are shared from some forum member,for newest software please go to original official website:https://www.ross-tech.com

In pack you will find:

1. a) eeprom+firmware(2 types)
2. b) hardware type detect program to know what to flash inside.
3. c) flash interface by usb (interface with genuine firmware , must be connected to 12V)
4. d) loader to be used with any genuine install kit
5. e) info.pdf to read how to do stuff
6. f) projects already made to flash by programmer (tl866 or usbasp)
7. g) ept and xml files for ft232rl or rq just in case.

https://mega.nz/#!C41lmbaQ!CZ8pRAwFdbAtKGHL5EkZ31JqCluhh1IZjUR1jaFtvwg

 

LOADER V2.txt

Update 14.08.2017

Loader V2 compatible with RL-RQ-BL-BM interfaces.

Reworked tool for update interface by USB – keeps count of type of hw in eeprom.

New eeprom dumps for each version of hardware

Included in pack Progisp v1.72 and also Mprog 3.5 with templates

Remade projects with new dumps for Progisp and TL866

All versions released until today on any language work even NEZ one 🙂

https://mega.nz/#!m0tWFb6J!gjjBn4vR85WEjIKHJuDya7KuYNfvjU9Ftp7_oJkSbRs

 

 

UPA VCDS FUSES for HW44 and HW46.zip

https://mega.nz/#!astWRSaS!gH3n21USyxVxdM8wHMzIjfBZWQbO4MSVK3YFHD0tF1A

 

 

VCDS Loader V4.txt

New version with new eeprom, need to rewrite your interface with new usb flasher.

One multilingual eeprom is not possible anymore. Use VAGCOM_EEWriteLang to write eeprom of your choice.

https://mega.nz/#!mh9WXTTY!C6DfnSEKyliMWWOkFWGgdmJiwVyqRdXy_QJen2WL29A

 

VCDS Computer Requirements:

VCDS requires a computer running Microsoft Windows (the HEX-NET can be used with VCDS-Mobile on other platforms but that use is still in beta testing). A Laptop is most convenient but a desktop PC can also be used.
We recommend a PC running Windows 7, 8.1, or 10 with at least 2GB of RAM (single-core Atom-class processors are no longer recommended). Screen resolution of at least 800×600 is recommended.

 

 

How to Install VCDS Software:

Double click the icon desktop，wait for installing，as shown:

Wait for progress complete to 100%

Select “Next”

Check “I accept the terms of the License Agreement”

Select “Next”

Select components to install,then select “Next”

Wait for progress complete

Click “Finish”

How to use VCDS:

Run VCDS software，connect VCDS VAG COM to your computer USB interface

Click options

Click Test,show that VCDS VAG COM hardware has been activated

Then click save，you can use VCDS VAG COM to test your car

As shown，choose function you want