This instruction show you guide on how to remove and install water temperature regulator housing.
Related Contents:
Perkins EST 2024A & 2023A & 2019A Software Free Download
Perkins SPI2 2018A EPC+Service Manual Free Download
Removal Procedure
1 Drain the coolant from the cooling system into a suitable container for storage or disposal.
Refer to Operation and Maintenance Manual,“Cooling System Coolant – Change” for the correct procedure.
2.Remove bolts (1) and remove outlet connection (2).
3 Remove joint (3) and remove water temperature regulator (4). Note the orientation of the water temperature regulator for installation.
4 Loosen the hose clamp and disconnect hose (8) from water temperature regulator housing (6).
5 Remove bolts (7) and remove water temperature regulator housing (6) from the cylinder head.
6 Remove joint (5).
Installation Procedure
1 Inspect the water temperature regulator for wear, damage and correct operation. Refer to Systems Operation,Testing and Adjusting,“Water Temperature Regulator – Test” for more information. If necessary, replace the water temperature regulator.
2 Ensure that the mating surfaces of the outlet connection, the water temperature regulator housing and the cylinder head are clean and free from damage.
3 Position bolts (7) and a new joint (5) onto water temperature regulator housing (6).
4 Position water temperature regulator housing
(6) onto the cylinder head. Tighten bolts (7) to a torque of 18 N·m (13 lb ft).
5 Install water temperature regulator (4) to water temperature regulator housing (6). Ensure the correct orientation of the water temperature regulator.
6 Position a new joint (3) and outlet connection (2) onto water temperature regulator housing (6).
7 Install bolts (1). Tighten the bolts to 18 N·m (13 lb ft).
8 Connect hose (8) to water temperature regulator housing (6). Tighten the hose clamps securely.
9 Fill the cooling system with coolant to the correct level. Refer to Operation and Maintenance Manual, “Cooling System Coolant -Change” for the correct procedure.
More trouble repair case for Perkins,pls refer to:Perkins Trouble Repair
This instruction show you guide on how to solve Scania truck motion and inclination detector,…
This instruction show you guide on how to solve JCB excavator 140 C130C-13 spool brake solenoid…
Scania truck fault in the CAN communication with the chassis management system (CMS),this instruction show…
The water pumps used on all Phaser/1000 Series engines have been changed. The changes to…
Here is the simple instruction on how to solve Deutz engine EMR3 trouble code 48…
CAT ET 2025A Power Shift Pressure Test function checks whether that the proportional reducing valve is…