Detroit Road Speed Above Programmable Threshold by DDDL

This instruction show you guide on how to use DDDL diagnostic software to do vehicle speed above programmable threshold while driving for Detroit Euro V MBE 900.

 

Preparations:

2024.06 Detroit Diesel Diagnostic Link DDDL 8.20 8.09 Free Download

 

Procedures:

This is an information-only fault. It indicates that vehicle speed is above a programmable threshold. It may be necessary to contact the truck owner or fleet manager to see if they have this feature enabled.

WARNING

ENGINE EXHAUST

To avoid injury from inhaling engine exhaust, always operate the engine in a well-ventilated area. Engine exhaust is toxic.

 

Check as follows:

1 Does the fleet operator have this feature enabled?

1a Yes; note the fault code in the repair order and clear the code only if the fleet or owner requests it. Release the vehicle.

1b No; Go to step 2.

 

2 Using DiagnosticLink , change the Common Powertrain Controller (CPC) parameters highlighted below to 99 (actual value which will be displayed in window is 98.92).

auto

Recent Posts

Valtra BH Series 140-210 Trouble Internal Roll inertial Sensor Fault

This instruction show you guide on how to solve Valtra BH Series 140-210 trouble code SA…

1 day ago

Caterpillar C9 Engine Throttle Position Out of Calibration 28 91-13 Trouble Solution

This instruction show you guide on how how to solve trouble code 28 PID 91-13…

4 days ago

Magneti Marelli 1 AVB-VW ECU Pinout

Vehicles: With AP 1.6, 1.8 and 2.0 Ml engines DE 97 to 99. And for…

6 days ago

Valtra BH Series 140-210 Internal lateral Inertial Sensor Recalibration

This instruction show you guide on how to solve Valtra BH Series 140-210 trouble code SA…

1 week ago

Bendix AutoVue 3G LDW System Driver Assistance Systems (DAS) Tests

JPRO 2025V3 Driver Assistance Systems (DAS) Tests allows the editing of configuration parameters.   Related Contents:…

2 weeks ago

How to Solve PCC2300 PowerCommand Membrane Buttons Not Functioning

This instruction show you guide on how to solve PCC2300 Powercommand Membrane buttons not working.…

2 weeks ago