2014 Volkswagen Polo P106900 Trouble Repair by Launch X431

A Volkswagen New Polo 2014 dashboard turned to system failure warning lights, system failures code “P106900 – collision cutoff has been triggered”.Here car-auto-repair.com will show you guide on how to use Launch X431 to repair/reset this trouble. And for more about Volkswagen repair,please check here:Volkswagen Trouble Repair.

2014-Volkswagen-Polo-P106900-Trouble-Repair-by-Launch-X431-1

 

What You need?

Launch X431 Device

 

Note:

1.Switch on the ignition;

2.Keep the battery voltage more than 12V;

3.X-431 should be performed in a good WiFi state, otherwise the diagnosis will be abnormal due to poor signal.

 

Operation Procedure

1.Select ShaiHai VW V21.61;

2.Select VW General System ;

3.Select system selection;

4.Select 44 Steering booster system

2014-Volkswagen-Polo-P106900-Trouble-Repair-by-Launch-X431-2

5.Perform [read fault code] display “P106900 – collision cutoff has been triggered”, and the next step will be carried out when the fault code cannot be cleared.

2014-Volkswagen-Polo-P106900-Trouble-Repair-by-Launch-X431-3

6.Security login,input password “20103”

2014-Volkswagen-Polo-P106900-Trouble-Repair-by-Launch-X431-4

7.Execute [system channel match], click the reset of all match values

2014-Volkswagen-Polo-P106900-Trouble-Repair-by-Launch-X431-5

8.Next, the reset status prompt of all the matching values is executed

2014-Volkswagen-Polo-P106900-Trouble-Repair-by-Launch-X431-6

9.After the success of the failure code, the power steering is restored to normal.

2014-Volkswagen-Polo-P106900-Trouble-Repair-by-Launch-X431-6

More test report about Launch X431 please check:Launch X431 Test report

(Visited 84 times, 1 visits today)